Everything You Need to Know about Peloton Bearing Replacement

Bearings are one of the most weighty components on a Peloton bike. In fact, no matter how good and durable your Peloton bearings are, you still need to interchange them after a usage time.

If you are wondering how to replace the Peloton bearings, the following article is precisely what you need. Keep reading and get things done!

Is Peloton Bearing Replacement Necessary?

The answer is definitely yes. If you don’t replace Peloton bearings at the right time, you may have to replace many other parts on your Peloton bike or even change to a new bike.

When the bearing is completely broken, the wheel will be stuck and the pedal cannot be spun anymore. In addition, using ineffective bearings can damage the constant velocity joint and the automatic transmission of the bike.

When Should You Replace The Peloton Bearing?

There are a few signs to help you identify whether it is time to replace the bearing of Peloton bikes, including:

• Grinding or rubbing noise when you pedal
• Increase in squealing and growling sounds when you speed up

Peloton Bearing Replacement – An Ultimate Guide

In this section, let’s see what you need to prepare and do to finish the Peloton bearing replacement!

Needed Equipment for Peloton Bearing Replacement

Below are what you need to prepare before replacing Peloton bearings:

• Screwdriver
• 5mm Allen key
• 4mm Allen key
• Torque wrench with 5mm bit
• 19mm socket

Process of Peloton Bearing Replacement

Follow these steps to remove and replace Peloton bearings:

Step 1: Unplug the Peloton to ensure safety before starting the replacement process

Step 2: Disassemble the front belt guard

• Use the screwdriver to remove the screw at the top of the belt guard
• Remove the plastic rivet located at the bottom of the belt guard

Step 3: Disassemble the cadence sensor bolt with a 4mm Allen key

Step 4: Disassemble the outer belt guard

• Use a Phillips head screwdriver to remove five screws on the outer belt guard

Step 5: Remove the Peloton belt from the pulley

• Slowly rotate the Peloton crank arm and pull the belt in the direction of the outside at the same time
• Be careful to keep your hand safe

Step 6: Take the Peloton flywheel out of the bike

• Prepare a soft surface to put the flywheel down
• Disassemble the axle bolts on both sides of the flywheel by using a 5mm Allen key
• Put it down with the drive hub side on the top

Step 7: Remove the bolts on the flywheel hub

• Use a 5mm Allen key to disassemble them
• If it’s a one-piece hub, take it out from the upper side
• If it’s a two-piece hub, take these pieces out from their sides

Step 8: Assemble the new drive hub

Step 9: Reattach the Peloton flywheel to the bike

Step 10: Move other disassembled parts back into their place

For more detailed and intuitive instructions, please watch the video below:

Recommended Tips to Protect The Peloton Bearing

Below are several tips to make your Peloton bearings last longer:

• Wipe down your Peloton bike frequently: It’s important to keep the bearings dry and clean to avoid rusting.
• Do not have physical impacts directly and strongly on bearings: That will create a misalignment in Pelotn bearings.
• Use suitable tools when mounting the bearings: Tools’ sizes that do not fit bearings could damage this part during the mounting and dismounting process.
• Lubricate the bearings properly: Choose the most suitable lubricants for your Peloton bearings and do not overuse them.

Peloton Support for Bearing Replacement

In case you are not able to find the solutions for common Peloton errors, you can contact Peloton Support to set up tech appointments and get answers.

Here is the contact information of Peloton Support:

• Phone number: (866) 679-9129
• Live chat on the Peloton Support Website

Conclusion

To sum up, Peloton bearing replacement is essential no matter what you need or not. Fortunately, the process of interchanging Peloton bearings is not too difficult. You just have to follow this detailed instruction to have perfect-running Peloton bearings.

FAQs

1. How long do bearings last on Peloton?

The answer mostly depends on the frequency level of your Peloton riding. On average, the bearings will last about 4 to 12 months on a Peloton bike.

2. What do bearings do on a Peloton Bike?

Peloton bearings are the component equipped in the center of the flywheel. It allows the pedals and wheel to turn.

3. How long is a Peloton warranty?

You can get 12 months of limited Peloton warranty and 36 months of extended warranty (for Original Bike, Bike+, and Tread).